Dependency of dynamic interlaminar shear strength of composites on test technique used

Studies are presented on dependency of dynamic interlaminar shear (ILS) strength on the experimental technique used for a typical plain weave E-glass/epoxy composite. Dynamic ILS strength was determined based on two experimental techniques, namely torsional split Hopkinson bar (TSHB) apparatus using thin walled tubular specimens and compressive split Hopkinson pressure bar (SHPB) apparatus using single lap specimens. The results obtained from these techniques are compared. In general, it is observed that dynamic ILS strength for composites obtained by TSHB testing using thin walled tubular specimens is lower than the dynamic ILS strength obtained using single lap specimens in compressive SHPB. The issues involved in TSHB testing of thin walled tubular specimens made of composites are discussed and the reasons for reduced dynamic ILS strength using thin walled tubular specimens are highlighted. Finite element analysis (FEA) of thin walled tubular specimens made of composite and resin subjected to quasi-static torsional loading is presented. Using FEA results, the reasons for lower ILS strength of composite thin walled tubular specimens are substantiated.     

Synergistic effect of maleimido phenyl urea derivatives mixed with some commercial stabilizers on the efficiency of thermal stabilization of PVC

Four novel antimicrobial maleimido phenyl urea stabilizers 1–4 were synthesized from N-[4-(chlorocarbonyl) phenyl] maleimide with phenyl urea and its derivatives (p-methyl, o-chloro and p-carboxy). The effect of mixing maleimido phenyl urea stabilizer 2 with each of the reference stabilizers, dibasic lead carbonate (DBLC), cadmium-barium-zinc stearate (Cd-Ba-Zn stearate) or n-octyltin mercaptide (n-OTM), on the stabilization efficiency in thermal degradation of rigid PVC at 180 °C in air, has been investigated. Mixing was effected in the range of 0–100 wt% of stabilizer 2 relative to each of the reference stabilizers. The stabilizing efficiency was evaluated by measuring the length of the thermal stability period (Ts), the period during which no detectable amount of hydrogen chloride gas could be observed, and also from the rate of dehydrochlorination as measured by continuous potentiometric determination, and by the extent of discoloration of the degraded polymer samples. The results show a true synergistic effect from the combination of stabilizer 2 with any of the reference stabilizers. Mixing of the stabilizers improves the Ts values, decreases the rate of dehydrochlorination and lowers the extent of discoloration of the polymer. The maximum synergism was attained when stabilizer 2 is mixed with either of the three reference stabilizers in equivalent weight ratio (50%/50%). The observed synergism may be attributed to the different mechanisms by which the investigated and the reference stabilizers work.     

The free retraction of natural rubber: A momentum-based model

The free retraction of vulcanised strips of natural rubber released from simple uniaxial deformation is studied using high speed cinematography in the context of a simple momentum theory. Good agreement between the theory and experiment is observed when vulcanisates are released from stresses below 1 MPa, which corresponds to tensile strains rates below 1 × 10³ s⁻¹. Above this critical stress and corresponding strain rate value, an increasing dispersion is observed in the form of slowing down of the characteristic retraction pulse, and also by a relaxation of strain ahead of the pulse front (a dispersion of the pulse). Holding samples at high strains for an extended period of time prior to releasing results in a further, significant retardation of the retraction pulse velocity. These effects are related to the increasing non-linearity of high strain rate retraction stress–strain behaviour. Energy balance arguments show that the dispersion of the retraction pulse is a prerequisite for pulse propagation, and that its magnitude underpins the deviation from the momentum model outlined in this paper.     

Missing value imputation strategies for metabolomics data

The origin of missing values can be caused by different reasons and depending on these origins missing values should be considered differently and dealt with in different ways. In this research, four methods of imputation have been compared with respect to revealing their effects on the normality and variance of data, on statistical significance and on the approximation of a suitable threshold to accept missing data as truly missing. Additionally, the effects of different strategies for controlling familywise error rate or false discovery and how they work with the different strategies for missing value imputation have been evaluated. Missing values were found to affect normality and variance of data and k‐means nearest neighbour imputation was the best method tested for restoring this. Bonferroni correction was the best method for maximizing true positives and minimizing false positives and it was observed that as low as 40% missing data could be truly missing. The range between 40 and 70% missing values was defined as a “gray area” and therefore a strategy has been proposed that provides a balance between the optimal imputation strategy that was k‐means nearest neighbor and the best approximation of positioning real zeros.     

Influence of Solution Volume on the Dissolution Rate of Silicon Dioxide in Hydrofluoric Acid

Experimental data and modeling of the dissolution of various Si/SiO₂ thermal coatings in different volumes of hydrofluoric acid (HF) are reported. The rates of SiO₂‐film dissolution, measured by means of various electrochemical techniques, and alteration in HF activity depend on the thickness of the film coating. Despite the small volumes (0.6–1.2 mL) of the HF solution, an effect of SiO₂‐coating thickness on the dissolution rate was detected. To explain alterations detected in HF activity after SiO₂ dissolution, spectroscopic analyses (NMR and FTIR) of the chemical composition of the solutions were conducted. This is associated with a modification in the chemical composition of the HF solution, which results in either the formation of an oxidized species in solution or the precipitation of dissolution products. HF₂^? accumulation in the HF solution, owing to SiO₂ dissolution was identified as the source of the chemical alteration.     

Theoretical Studies of the Reactions CFxH3−xCOOR+Cl and CF3COOCH3+OH

The mechanism and kinetics of the reactions of CF₃COOCH₂CH₃, CF₂HCOOCH₃, and CF₃COOCH₃ with Cl and OH radicals are studied using the B3LYP, MP2, BHandHLYP, and M06‐2X methods with the 6‐311G(d,p) basis set. The study is further refined by using the CCSD(T) and QCISD(T)/6‐311++G(d,p) methods. Seven hydrogen‐abstraction channels are found. All the rate constants, computed by a dual‐level direct method with a small‐curvature tunneling correction, are in good agreement with the experimental data. The tunneling effect is found to be important for the calculated rate constants in the low‐temperature range. For the reaction of CF₃COOCH₂CH₃+Cl, H‐abstraction from the CH₂ group is found to be the dominant reaction channel. The standard enthalpies of formation for the species are also calculated. The Arrhenius expressions are fitted within 200–1000 K as k_T(1)=8.4×10^?20T ^2.63exp(381.28/T), k_T(2)=2.95×10^?21T ^3.13exp(?103.21/T), k_T(3)=1.25×10^?23T ^3.37exp(791.98/T), and k_T(4)=4.53×10^?22T ^3.07exp(465.00/T).     

计算化学在正丁醚制备实验教学中的应用*

正丁醚的制备是重要的大学有机化学实验,为提高学生对该实验所涉及的反应机理和关键操作要点的深入了解,采用Gaussian计算软件对正丁醇在酸催化下和无催化剂下的反应体系进行了研究,重点考察了酸催化下反应的主、副反应方向的反应机理。结果表明无催化剂下,正丁醇在常压液相下几乎不能发生反应;在酸催化下,正丁醇发生取代反应生成醚的反应路径是优势反应通道;酸催化下正丁醇的取代和消除反应速率常数均随温度增加而迅速增大,但消除反应的反应速率随温度增加更快,温度超过420 K消除反应将变得很明显,综合考虑,制备正丁醚的反应温度应控制在130~140 ℃之间较为合适。利用计算化学以图、表和动图等形式直观、动态、量化地解释了正丁醇成醚和成烯反应的竞争,该结果有助于更好地控制该反应体系,可用作实验教材的补充内容。     

Mixed Quantum Classical Reaction Rates based on the Phase Space Formulation of the Hierarchical Equations of Motion

In a previous work [J. Chem. Phys. 140 , 174105 (2014)], we have shown that a mixed quantum classical (MQC) rate theory can be derived to investigate the quantum tunneling effects in the proton transfer reactions. However, the method is based on the high temperature approximation of the hierarchical equation of motion (HEOM) with the Debye-Drude spectral density, and results in a multi-state Zusman type of equation. We now extend this theory to include quantum effects of the bath degrees of freedom. By writing the full HEOM into a multidimensional partial differential equation in phase space, we can define a new reaction coordinate, and the previous method can be generalized to the full quantum regime. The validity of the new method is demonstrated by using numerical examples, including the spin-Boson model, and the double well model for proton transfer reaction. The new method is found to resolve some key problems of the previous theory based on high temperature approximation, including possible numerical instability in long time simulation and wrong rate constant at low temperatures.     

Ferrocene-modified dendrimers as support of copper nanoparticles: evaluation of the catalytic activity for the decomposition of ammonium perchlorate

Ferrocene (Fc)-based systems are frequently used as burning rate catalysts in the decomposition of ammonium perchlorate (AP)-based propellants. However, small Fc derivatives migrate to the surface of the propellant resulting in undesirable changes in the designed burning parameters and unstable combustion. To retard the migration and to increase the combustion rate of AP, fourth-generation polyamidoamine (PAMAM) dendrimers modified with Fc (PAMAM generation 4 [G4]-Fc) were synthetized and used as support for the obtention of copper nanoparticles (CuNPs). PAMAM G4 produced smaller nanoparticles (1–2 nm) with lower aggregation than PAMAM G4-Fc (12–14 nm). X-ray photoelectron spectroscopy (XPS) characterization confirmed the superior stabilizing and protecting effect against oxidation of CuNPs by PAMAM G4 in comparison to PAMAM G4-Fc, whereas molecular dynamics simulations have shown less flexibility and lower presence of stabilizing sites for nanoparticles in PAMAM G4-Fc. Antimigration tests confirmed the negligible migration of PAMAM G4-Fc compared with Fc, whereas PAMAM G4-Fc|CuNP affected the high-temperature decomposition of AP positively, decreasing the decomposition temperature in 87 °C owing to a synergistic effect between CuNPs and Fc. PAMAM G4-Fc can act both as an effective antimigration system of Fc and as a stabilizing framework of metal nanoparticles with application as catalysts of AP.     

Growth of Single-walled Carbon Nanotubes on Substrates Using Carbon Monoxide as Carbon Source

The growth of single-walled carbon nanotubes(SWCNTs) on substrates has attracted great interests because of the potential applications in various fields. Carbon monoxide(CO) was used as the carbon source for the growth of SWCNTs on silicon substrates. Random or oriented SWCNTs can be produced by varying the CO flow rate. When the flow rate of CO was as low as 20 sccm(sccm:standard cubic centimeter per minute), dense SWCNT networks with clean surface were produced. When the flow rate was above 50 sccm, vertically aligned SWCNT(VA-SWCNT) arrays were grown. Well-aligned VA-SWCNT arrays were obtained in the temperature range of 650-800℃ and the content of large-diameter(above 1.7 nm) tubes in the array increased with the temperature. The height of the array was affected by the growth temperature, the CO flow rate, and the growth time. These findings indicate CO can be used as an efficient carbon source for the growth of SWCNTs on substrates under low flow rates.